Site Navigation

Your Account

Choose Language

Introduction

Remove the o-ring sealing the rear of your HexBright LED Light.

Tools

No tools required.

Parts

No parts required.

Holding the outer case firmly in one hand, twist the nut on the rear of the HexBright counterclockwise. Holding the outer case firmly in one hand, twist the nut on the rear of the HexBright counterclockwise.
  • Holding the outer case firmly in one hand, twist the nut on the rear of the HexBright counterclockwise.

Add Comment

Continue twisting until the threads on the interior frame twist free from the outer case. Slide the interior frame out of the HexBright.
  • Continue twisting until the threads on the interior frame twist free from the outer case.

  • Slide the interior frame out of the HexBright.

Add Comment

In order to remove the battery from the interior frame of the HexBright, you will be knocking the interior frame firmly against your palm.
  • In order to remove the battery from the interior frame of the HexBright, you will be knocking the interior frame firmly against your palm.

    • The battery is held in place by a plastic shim, and this shim will dislodge when the battery is knocked out of the frame.

Add Comment

Holding the interior frame from the side nearest the positive side of the battery, knock the opposite end of the interior frame sharply against the palm of your hand. If the battery does not come out at first, try knocking a bit more vigorously. Do your best to catch the battery and plastic shim as they fall out.
  • Holding the interior frame from the side nearest the positive side of the battery, knock the opposite end of the interior frame sharply against the palm of your hand.

    • If the battery does not come out at first, try knocking a bit more vigorously.

  • Do your best to catch the battery and plastic shim as they fall out.

Add Comment

Firmly grasping the interior frame in one hand, twist the rear nut counterclockwise to unscrew it from the internal frame. Remove the rear nut from the interior frame. Remove the rear nut from the interior frame.
  • Firmly grasping the interior frame in one hand, twist the rear nut counterclockwise to unscrew it from the internal frame.

  • Remove the rear nut from the interior frame.

Add Comment

Using your thumb, roll the o-ring up and over the threads on the rear of the interior frame. Using your thumb, roll the o-ring up and over the threads on the rear of the interior frame. Using your thumb, roll the o-ring up and over the threads on the rear of the interior frame.
  • Using your thumb, roll the o-ring up and over the threads on the rear of the interior frame.

Add Comment

Remove the O-ring from the interior frame.
  • Remove the O-ring from the interior frame.

Add Comment

Finish Line

Christian Carlberg

Member since: 09/11/2012

175 Reputation

7 Guides authored

One Comment

Dear Sir,

I'm Roger, firstly wish you a advanced happy christmas day. We are a producer that specialize in manufacture standards o-rings,with good quality and pretty competitive price. We accept with NBR,VT,EPDM,SIL type of rubber's purchases. The company has been in charged of three diffrent brands party from high to normal quality level. As the fresh new year comes, our factory is also stepping upon a new grade both on our products and mangerment. The plants have been organized well and try our best to keep them clean and smell good for consideration of staffs' heathy care. It reacts to the workers being more efficiency to finish our clients' order. So we can more confidently provide you very higher quality and competitive price for your to choose us.

Best regards!

Roger

Ningbo Jiaodian Sealing Industry Co.,Ltd

Add: No.202 Dingqiao Road, Jiangsan, Yinzhou District, Ningbo, Zhejiang, China

Tel: 86-0574-86688212

Fax: 86-0574-83003605

E-mail:Roger@jd-seal.com

Roger - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 711